- 권한신청
- P-ISSN1738-3110
- E-ISSN2093-7717
- SCOPUS, ESCI
The Development of New Cost-Effective Optimization Technology for OLED Market Entry
The Development of New Cost-Effective Optimization Technology for OLED Market Entry
Kwon, Lee-Seung (Department of Health Care Management, Catholic Kwandong University)
Lee, Woo-Sik (Department of Chemical & Biological Engineering, Gachon University)
Abstract
Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.
- keywords
- SUS MASK, OLED Market Penetration, Cost-effective Optimization Technology Development, ORP, Process Capability Index
참고문헌
Ahn, J. H., & Lee, S. S. (2011). Principles of Photolithography. Physics and High Technology, 20(2), 1-8.
Belyaev, V. V., Suárez, D. A., & Atiencia, J. M. (2017). The conduct of organic compounds applied to information display devices. Procedia Computer Science, 103, 75-81.
Bizzarri, C., Spuling, E., Knoll, Daniel, M., Volz, D., & Bräse, S. (2018). Sustainable metal complexes for organic light-emitting diodes (OLEDs). Coordination Chemistry Reviews, 373(15), 49-82.
Chen, Y. C., Pan, C. T., Hsieh, C. C., Su, C. Y., Wu, H. C., & Li, W. C. (2013). Fabrication of Light Extraction Efficiency of Organic Light-Emitting Diodes with 3D Aspherical Microlens by Using Dry Etching Process. Journal of Nanomaterials, 7, 1-6.
Cheong, K. H. (2015). “Use of Statistical Process Control for Quality Assurance in Radiation Therapy”. Progress in Medical Physics, 26(2), 59-71.
Cho, Y. H., & Daim, T. (2016) "OLED TV technology forecasting using technology mining and the Fisher-Pry diffusion model". Foresight, 18(2), 117-137.
Elp, J. V., Giesen, P. M., & Groof, A. M. (2004). Low-thermal expansion electrostatic chuck materials and clamp mechanisms in vacuum and air. Microelectronic Engineering, 73–74, 941-947.
Eritt, M., May, C., Leo, K., Toerker, M., & Radehaus, C. (2010). OLED manufacturing for large area lighting applications. Thin Solid Films, 518(11), 3042-3045.
Guedes, A. F., Guedes, V. P., Tartari, S., Souza, M. L., & Cunha, I. J. (2014). New Optoelectronic Technology Simplified for Organic Light Emitting Diode (OLED). Journal of Systemics, Cybernetics and Informatics, 12(3), 72-74.
Heravi, M. M., Behbahani, F. K., Daraie, M., & Oskooie, H. A. (2009). Fe(ClO4)3· 6H2O: A mild and efficient catalyst for one-pot three component synthesis of β-acetamido carbonyl compounds under solvent-free conditions. Molecular Diversity, 13(3), 375-378.
Heo, J. Y., Min, H. S., & Lee, M. K. (2015). Laser Micromachining of Permalloy for Fine Metal Mask. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2(3), 225-230.
Jung, M. J., Kim, Y. D., Kwon, L. S., Lee, W. S., & Kwon, W. T. (2018). A Study on Cost-effective Treatment of Wastewater and Odor Reduction for Southeast Asian Market Entry. International Journal of Industrial Distribution & Business, 9(12), 23-29.
Khaoula, B., & Azzedine, T. (2014). Electrical Characteristics of Organic Light Emitting Diode (OLED) Finite Difference Modeling. Journal of New Technology and Materials, 4(1), 35-38.
Kim, D. H., & Hyun, J. K. (2017). Development of Performance Indices for Agro-food Distribution Corporations Based on the AHP Method. Journal of Distribution Science, 15(12), 95-102.
Kim, G. M., & Brugger, J. (2004). “Fabrication of Miniaturized Shadow-mask for Local Deposition”. Journal of the Korean Society of Precision Engineering, 21(8), 236-240.
Kim, Y. J., & Shim, J. B. (2011). A Study on the OLED Lighting Industry's Effects on Korean Economy using Input-Output Tables. Journal of Industrial Economics and Business, 24(4), 2225-2246.
Kuma, H., & Hosokawa, C. (2014). Blue fluorescent OLED materials and their application for high-performance devices. Science and technology of advanced materials, 15(3), 34-42.
Lee, H. M., Park, M. R., Park, G. H., & Park, C. H. (2012). “Wet Etching of Stainless Steel Foil by Aqueous Ferric Chloride Solution”. Korean Chemical Engineering Research, 50(2), 211-216.
Lee, H. K., Chung, K. S., & Yu, J. S. (2009). Selective Etching of Thick Si3N4, SiO2 and Si by Using CF4/O2 and C2F6Gases with or without O2 or Ar Addition. Journal of the Korean Physical Society, 54(5), 1816-1823.
Lee, S., Yoo, K., & Lee, J. (2019). “Preparation of Cu2O Powder in NaOH solution Using CuCl Obtained from Spent Printed Circuit Boards Etchant”. The Korean Society of Mineral and Energy Resources Engineers, 55(3), 194-199.
Mai, T. A., & Richerzhagen, B. (2007). Manufacturing of 4th Generation OLED Masks with the Laser MicroJet®Technology. Society for Information Display, 38(1), 1596-1598.
Mijangos, L., Ziarrusta, H., Ros, O., Kortazar, Fernández, L. A.l, Olivares, M., Zuloaga, O., Prieto, A., Etxebarria, N. (2018). Ocurrence of emerging pollutants in estuaries of the Basque Country: Analysis of sources and distribution, and assessment of the environmental risk. Water Research, 147(15). 152-163.
Moscony, J. J., Maynard, R. B., Wetzel, C. M., Eshleman, C. C., & Saunders, M. H. (1996). Optimization of the ferric chloride etching of shadow masks. Journal of the society for the information society, 4(4), 231-239.
O’Regan, M. (2008). Reducing AMOLED Manufacturing Costs, Korean Information Display Society. International Meeting on Information Display, Special edition. 27-29.
Taydakov, I. V., Akkuzina, A. A., Avetisov, R. I., Khomyakov, A. V., Saifutyarov, R. R., & Avetissov, I. C. (2016). Effective electroluminescent materials for OLED applications based on lanthanide 1.3-diketonates bearing pyrazole moiety. Journal of Luminescence, 177, 31-39.
Tseng, F. M., Cheng, A. C., & Peng, Y. N. (2009). Assessing market penetration combining scenario analysis, Delphi, and the technological substitution model: The case of the OLED TV market. Technological Forecasting and Social Change, 76(7), 897-909.
Wang, Y., Li, X., Duan, Q., Liu, X., Yan, G., & Ma, D. (2019). High-performance red organic light-emitting diodes with ultrathin Cu film as anodes. Organic Electronics, 68, 218-220.
Williams, S. G. (2015). Advanced materials are essential to unlocking new LED and OLED devices. ECN, Mar 6, ISSN:15233081
Wu, C. W., Pearn, W. L., & Kot, S. (2009). An overview of theory and practice on process capability indices for quality assurance. International Journal of Production Economics, 117(2), 338-359.
Xiong, Y., Deng, F., Xu, S., & Gao, S. (2017). Performance analysis of multi-primary color display based on OLEDs/PLEDs. Optics Communications, 398, 49-55.
Xu, Y., Li, J., & Liu, L. (2016). Current Status and Future Perspective of Recycling Copper by Hydrometallurgy from Waste Printed Circuit Boards. Procedia Environmental Sciences, 31, 162-170.
Zhang, M. L, & Lee, S. J. (2017). A Study of the Impacts on Electronic Distribution Industry after Korea-China FTA. International Journal of Industrial Distribution & Business, 8(6), 33-40.
Zyczkowska, K., & Konarzewska, B. (2016). New Materialitytowards ‘Media Environments’. Procedia Engineering, 161, 1275-1281.
- 다운로드 수
- 조회수
- 0KCI 피인용수
- 0WOS 피인용수