바로가기메뉴

본문 바로가기 주메뉴 바로가기

(사)한국터널지하공간학회

ISSN : 2233-8292

Article Contents

Prev Next
e-Submission

Vol.15 No.3
Citation Share

Evaluation of the performance for the reformed lattice girders

(사)한국터널지하공간학회 / (사)한국터널지하공간학회, (P)2233-8292; (E)2287-4747
2013, v.15 no.3, pp.201-214



& (2013). Evaluation of the performance for the reformed lattice girders. (사)한국터널지하공간학회, 15(3), 201-214.
  • Downloaded
  • Viewed
PDF Download

Abstract

Lattice girders are widely used as a substitute for H-steel ribs at domestic tunnels. However, lattice girders have a weak point in terms of the support capacity compare to H-steel ribs because of the lower stiffness and the weakness of the welded parts. To improve the weakness of the lattice girder, reformed lattice girders are developed in Korea by adding one more spider and having flat welded surface. Laboratory tests and field measurements were performed for the original and the reformed lattice girders to evaluate the performance of the reformed lattice girders. According to the laboratory compression test, reformed lattice girders have 16% higher load bearing capacity than that of original lattice girders. Reformed lattice girders are more stable than original lattice girders because reformed lattice girders tend to bend less according to the field measurements.

keywords
격자지보재, H형강 지보재, 현장 계측, 개량형 격자지보재, Lattice girder, H-steel ribs, Field measurements, Reformed lattice girder

Reference

1.

1. KICT (1995), “A study of the effectiveness of lattice girders for tunnel support”, Sambo Construction Equipment Manufacturers, 196p.

2.

2. KICT (1996), “Study of the applicability of lattice girders for tunnel support", Chunwon Industry, 281p.

3.

3. KICT (2009), “Development of rapid and safe tunnel construction method using IT and new materials (4th)”, Report, Ministry of Land, Transportation and Maritime Affairs.

4.

4. Kim, D.G., Bae, G.J. (2008), “Development of a laboratory testing method for evaluating the loading capacity of lattice girder”, Tunnelling Technology, Vol. 10, No. 4, pp. 371-382.

5.

5. Kim, H.J., Jin, S.H., Park, S.H. (2008), “Field measurements for the lattice girder and the shotcrete lining”, The Journal of Engineering Geology, The Korean Society of Engineering Geology, Vol. 19, No. 1, pp. 93-102.

6.

6. Kim, H.J., Kang, H.W. (2012), “Tunnel instrumentation on the lattice girder using load cells”, The Journal of Engineering Geology, The Korean Society of Engineering Geology, Vol. 22, No. 3, pp. 323-330.

7.

7. Kim, H.J., Park, S.H., Lee, K. (2009), “Suggested method for the tunnel instrumentation on the lattice girder from the results of the laboratory test using load cells”, The Journal of Engineering Geology, The Korean Society of Engineering Geology, Vol. 19, No. 3, pp. 269-275.

8.

8. Ministry of Construction & Transportation (1996), “Standard Specification for Tunnelling”, Korean Tunnelling Association, 154p.

9.

9. Moon, H.D., Lee, S.W., Bae, G.J. (1996), “Evaluation of an applicability of lattice girders for the tunnel support”, Tunnel and Underground Space, Korean Society for Rock Mechanics, Vol. 6, No. 2, pp. 122-130.

10.

10. Moon, H.D., Paik, Y.S., Bae, G.J. (1997), “An experimental study on the characteristics of a composite structure of lattice girder and shotcrete”, Journal of the Korean Geotechnical Society, Vol. 13, No, 2, pp. 155-167.

11.

11. Yoo, C.S., Kim, Y.J., Bae, G.J., Moon, H.D. (1997), “An experimental study on load bearing capacity of lattice girder as a steel support in tunnelling”, Journal of the Korean Geotechnical Society, Vol. 13, No. 4, pp. 163-175.

(사)한국터널지하공간학회

e-Submission OA Policy