바로가기메뉴

본문 바로가기 주메뉴 바로가기

(사)한국터널지하공간학회

A preliminary study on economical efficiency of a room-and-pillar excavation method in comparison with 2-arch tunnelling method

(사)한국터널지하공간학회 / (사)한국터널지하공간학회, (P)2233-8292; (E)2287-4747
2013, v.15 no.6, pp.599-612




  • Downloaded
  • Viewed

Abstract

This study aims to investigate an economical efficiency of two excavation methods with respect to the room-and-pillar method for the underground space and conventional excavation method, i.e. 2-arch tunnelling method. For feasibility study, an excavation cost for both room-and-pillar method and 2-arch tunnelling method was estimated when the same space in operation was required. It was assumed that properties of reinforcements and rock were adopted from literatures. However, an excavation shape of the room-and-pillar method was assumed not to be the rectangular shape which is a general type in the room-and-pillar method but to be an arch shape in order to compare with the conventional excavation method (2-arch tunnelling) and to achieve the maximum bearing capacity of the structure during excavation. Consequently,the wider space in use or required and the better condition of rock we assumed, the more economical advantage we have in the room-and-pillar method than the 2-arch tunnelling method.

keywords
주방식 공법, 암주, 경제성, 2아치 터널, 굴착, Room and pillar method, Rock pillar, Economical efficiency, 2-arch tunnel, Excavation

Reference

1.

1. Bieniawski, Z.T. (1967) “Mechanism of brittle failure of rock”, J. of Rock Mech. and Min. Sci. Vol. 4. No. 4, pp. 395-430.

2.

2. Bieniawski, Z.T. (1976), “Rock mass classification in rock engineering”, Exploration for Rock Engineering, Proc. of the Syrup., Balkema, London, Vol. 1, pp. 97-106.

3.

3. Hartman, H.L., Mutmansky, J.M. (2002), Introductory Mining Engineering, 2nd edition, Wiley, New Jersey.

4.

4. HDEC (2010), Analysis report of TK preliminary design for the riverside expressway, Hyundai Engineering and Construction (in Korean).

5.

5. KICT (2008), Study on reinforcements pattern of tunnel with high performance reinforcement, Korea Institute of Construction and Technology (in Korean).

6.

6. Lee, C., Chang, S.-H., Shin, H.-S. (2013), “A numerical study on evaluation of unsuported pillar strength in the room and pillar method”, Journal of Korean Tunnelling and Underground Space Association, Vol. 15, No. 04, pp. 444-453 (in Korean).

7.

7. Lee, I.M. (2003), Rock mechanics, Seron (in Korean).

8.

8. MILT (2007), Design criteria of tunnel, Ministry of Land, Infrastructure and Transport, pp. 52 (in Korean).

(사)한국터널지하공간학회