바로가기메뉴

본문 바로가기 주메뉴 바로가기

(사)한국터널지하공간학회

Long-term strength of shotcrete with improved C12A7 based mineral accelerator

(사)한국터널지하공간학회 / (사)한국터널지하공간학회, (P)2233-8292; (E)2287-4747
2014, v.16 no.2, pp.135-148
https://doi.org/10.9711





  • Downloaded
  • Viewed

Abstract

This study was performed to evaluate the performance about Improved C12A7 based mineral accelerator (ICM) increased in initial and long-term strength. ICM was developed to overcome the long-term strength decrease in existing accelerator. To evaluate the performance of ICM according to addition rate, setting time, compressive strength, and flexural strength tests were conducted in laboratory. In results, initial setting time was slower, final setting time was faster than existing C12A7 based mineral accelerator (CM) when usage of ICM 6%. In compressive and flexural strength, existing CM was higher than ICM at 3hours and 1day. After 7days, strength of shotcrete using ICM was increased. Rebound test, compressive strength and flexural strength test with optimum addition rate through the laboratory test were conducted in field. Field experiment results were the same as laboratory test. Long-term strength performance of ICM was superior to existing accelerator.

keywords
개랑형 C12A7계 광물계 급결제, 숏크리트, 장기강도, 혼화재, Admixture, C12A7 mineral based accelerator, Long-term Strength, Shotcrete

Reference

1.

1. Park, H.G., Lee, M.S., Kim, J.K., An, B.J. (2002), “Development of high performance shotcrete for permanent shotcrete tunnel lining (I : Application of new type accelerator for high strength shotcrete)”, Proceeding of Korea Concrete Institute, Vol. 14, pp. 1023-1030.

2.

2. Park, H.G., Lee, M.S., Won, J.P., Kim, J.K. (2004), “Performance of wet-mixed shotcrete with powder types cement mineral accelerator”, Journal of Korea Society of Civil Engineer, Vol. 24, No. 1C, pp. 65-69.

3.

3. Won, J,P., Sung, S.K., Park, H.G., Lee, M.S. (2005), “Durability characteristics of shotcrete with C12A7 mineral based accelerator”, Journal of Korea Society of Civil Engineer, Vol. 25, No. 3C, pp. 235-240.

4.

4. Won, J.P., Kim, H.H., Lee, S,W., Kim, W.J., Jang, C.I. (2007), “Engineering properties of high performance shotcrete for permanent support apply large size underground space”, Proceeding of Korea Concrete Institute, Vol. 19, No. 1, pp. 569-572.

5.

5. Lee, S.P., Ryu, J.H., Lee, S.D., Jeon, S.W., Lee, S.I. (2007), “Performance improvement and durability evaluation of shotcrete for permanent tunnel support”, Tunnel & Underground Space, Journal of Korean Society for Rock Mechanics, Vol. 17, No. 4, pp. 266-284.

6.

6. Bae, G.J., Jang, S.H., Choi, S.W., Choi, M.S., Chae, J.G., Lee, B.H. (2012), “High performance wet-mix shotcrete using alkali-free accelerator and HPA for early and high stabilization of tunnel”, Nature, Tunnel & Underground Space, Journal of Korean Society for Rock Mechanics, Vol. 14, No. 6, pp. 59-63.

7.

7. Sung, S.K. (2005), “Performance of shotcrete with C12A7 mineral based accelerator”, Master thesis, Konkuk University.

8.

8. ACI Committee 506 (1995), “Specification for materials, proportioning and application of shotcrete”, ACI 506.2-90.

9.

9. Morgan, D.R., Wolsiefer, J.T. (1991), “Silica fume in shotcrete”, Proceeding of the CANMET/ACI International Workshop, Washington, D.C., USA, April 1991, pp. 2-19.

10.

10. Park, H.G., Sung, S.,K., Park, C.G., Won, J.P. (2008), “Influence of a C12A7 mineral-based accelerator on the strength and durability of shotcrete”, Cement and Concrete Research, Vol. 38, No. 3, pp. 379-385.

11.

11. Won, J.P., Hwang, U.J., Kim, C.G., Lee, S.J. (2013), “Mechanical performance of shotcrete made with high-strength cement-based accelerator”, Construction and Building Material, Vol. 49, pp. 175-183.

(사)한국터널지하공간학회