바로가기메뉴

본문 바로가기 주메뉴 바로가기

ACOMS+ 및 학술지 리포지터리 설명회

  • 한국과학기술정보연구원(KISTI) 서울분원 대회의실(별관 3층)
  • 2024년 07월 03일(수) 13:30
 

Journal of the Korean Association of Oral and Maxillofacial Surgeons

  • P-ISSN2234-7550
  • E-ISSN2234-5930
  • SCOPUS, KCI, ESCI
윤필영(분당서울대학교병원) pp.149-149
윤경인(가톨릭대학교) ; 김동준(가톨릭관동대학교) ; 박재억(가톨릭대학교) pp.150-155
초록보기
초록

Abstract

Objectives: The objective of this study is to determine the adequate concentration and to evaluate the osteogenic potential of simvastatin in human maxillary sinus membrane-derived stem cells (hSMSC). Materials and Methods: Mesenchymal stem cells derived from the human maxillary sinus membrane were treated with various concentrations of simvastatin. The adequate concentration of simvastatin for osteogenic induction was determined using bone morphogenetic protein (BMP-2). The efficacy of osteogenic differentiation of simavastatin was verified using osteocalcin mRNA, and the mineralization efficacy of hSMSCs and simvastatin treatment was compared with alkaline phosphatase and von Kossa staining. Results: Expression of BMP-2 mRNA and protein was observed after three days and was dependent on the concentration of simvastatin. Expression of osteocalcin mRNA was observed after three days in the 1.0 μM simvastatin-treated group. Mineralization was observed after three days in the simvastatin-treated group. Conclusion: These results suggest that simvastatin induces the osteogenic potential of mesenchymal stem cells derived from the human maxillary sinus membrane mucosa.

이지영(서울대학교) ; 김영균(서울대학교) ; 이양진(서울대학교) ; 최준호(The Hill School) pp.156-160
초록보기
초록

Abstract

Objectives: Interest in bone graft material has increased with regard to restoration in cases of bone defect around the implant. Autogenous tooth bone graft material was developed and commercialized in 2008. In this study, we evaluated the results of vertical and horizontal ridge augmentation with autogenous tooth bone graft material. Materials and Methods: This study targeted patients who had vertical or horizontal ridge augmentation using AutoBT from March 2009 to April 2010. We evaluated the age and gender of the subject patients, implant stability, adjunctive surgery, additional bone graft material and barrier membrane, post-operative complication, implant survival rate, and crestal bone loss. Results: We performed vertical and horizontal ridge augmentation using powder- or block-type autogenous tooth bone graft material, and implant placement was performed on nine patients (male: 7, female: 2). The average age of patients was 49.88±12.98 years, and the post-operative follow-up period was 35±5.31 months. Post-operative complications included wound dehiscence (one case), hematoma (one case), and implant osseointegration failure (one case; survival rate: 96%); however, there were no complications related to bone graft material, such as infection. Average marginal bone loss after one-year loading was 0.12±0.19 mm. Therefore, excellent clinical results can be said to have been obtained. Conclusion: Excellent clinical results can be said to have been obtained with vertical and horizontal ridge augmentation using autogenous tooth bone graft material.

김영균(서울대학교) ; 안교진(서울대학교) ; 윤필영(분당서울대학교병원) ; 김민경(서울대학교) ; 양홍서(전남대학교) ; 이양진(서울대학교) ; 배지현(서울대학교) pp.161-167
초록보기
초록

Abstract

Objectives: The objective of this study is compare the rate of marginal bone resorption around hydroxyapatite-coated implants given different loading times in order to evaluate their stability. Materials and Methods: The study was conducted retrospectively for one year, targeting 41 patients whose treatment areas were the posterior maxilla and the mandible. Osstem TS III HA (Osstem Implant Co., Busan, Korea) and Zimmer TSV-HA (Zimmer Dental, Carlsbad, CA, USA), which employ the new hydroxyapatite coating technique, were used. The patients were divided into two groups - immediate and delayed loading - and the bone level at the time of loading commencement and after one year of loading was measured using periapical radiography. Differences between the groups were evaluated using Mann-Whitney (α=0.05). Results: For all patients as a single group, the survival rate of the implants was 100%, and the mean marginal bone loss was 0.26±0.59 mm. In comparison of the differences by loading, mean marginal bone loss of 0.32±0.69 mm was recorded for the immediate loading group whereas the delayed loading group had mean marginal bone loss of 0.16±0.42 mm. However, the difference was not significant (P>0.05). Conclusion: Within the limited observation period of one year, predictable survival rates can be expected when using immediately loaded hydroxyapatite-coated implants.

김은자(원광대학교) ; 김은정(원광대학교) ; 천해명(원광대학교) ; 최은주(원광대학교) ; 권경환(원광대학교) pp.168-174
초록보기
초록

Abstract

Objectives: The aim of this study is to investigate the correlation between 2-dimensional (2D) cephalometric measurement and 3-dimensional (3D) cone beam computed tomography (CBCT) measurement, and to evaluate the availability of 3D analysis for asymmetry patients. Materials and Methods: A total of Twenty-seven patients were evaluated for facial asymmetry by photograph and cephalometric radiograph, and CBCT. The 14 measurements values were evaluated and those for 2D and 3D were compared. The patients were classified into two groups. Patients in group 1 were evaluated for symmetry in the middle 1/3 of the face and asymmetry in the lower 1/3 of the face, and those in group 2 for asymmetry of both the middle and lower 1/3 of the face. Results: In group 1, significant differences were observed in nine values out of 14 values. Values included three from anteroposterior cephalometric radiograph measurement values (cant and both body height) and six from lateral cephalometric radiographs (both ramus length, both lateral ramal inclination, and both gonial angles). In group 2, comparison between 2D and 3D showed significant difference in 10 factors. Values included four from anteroposterior cephalometric radiograph measurement values (both maxillary height, both body height) and six from lateral cephalometric radiographs (both ramus length, both lateral ramal inclination, and both gonial angles). Conclusion: Information from 2D analysis was inaccurate in several measurements. Therefore, in asymmetry patients, 3D analysis is useful in diagnosis of asymmetry.

장제신(전남대학교) ; 유길화(전남대학교) ; 윤성환(전남대학교) ; 하지원(전남대학교) ; 정성곤(전남대학교) ; 국민석(전남대학교) ; 박홍주(전남대학교) ; 유선열(전남대학교) ; 오희균(전남대학교) pp.175-181
초록보기
초록

Abstract

Objectives: This retrospective study was performed to evaluate the clinical impact of diabetes mellitus on the prognosis in secondary space infection. Materials and Methods: Medical records, radiographic images, computed tomography, and microbial studies of 51 patients (25 diabetic patients and 26 non-diabetic patients) were reviewed. Patients were diagnosed as secondary fascial space infections with odontogenic origin and underwent treatment at Chonnam National University Hospital, in Department of Oral and Maxillofacial Surgery, from January 2007 to February 2009. Results: Compared to patients without diabetes, patients with diabetes were presented with the following characteristics: older age (diabetic patients: 62.9 years, non-diabetic patients, 47.8 years), more spaces involved (diabetic patients, 60%; non-diabetic patients, 27.3%), more intense treatment, longer hospitalization (diabetic patients, 28.9 days; non-diabetic patients, 15.4 days), higher white blood cell and C-reactive protein values, higher incidence of complication (diabetic patients, 40%; non-diabetic patients, 7.7%), and distinctive main causative microorganisms. Conclusion: These results suggest that the prognosis of diabetic patients is poorer than that of non-diabetic patients in secondary space infections since they had greater incidence rates of involved spaces, abnormal hematologic findings, more complications, and additional procedures, such as tracheostomy.

변준호(경상대학교) ; 강영훈(경상대학교) ; 최문정(경상대학교) ; 박봉욱(경상대학교) pp.182-187
초록보기
초록

Abstract

Keratocystic odontogenic tumors (KCOT) - previously termed odontogenic keratocysts (OKC) - are characterized by aggressive behavior and a high rate of recurrence. Histopathologically, the basal layer of KCOT shows a higher cell proliferation rate and increased expression of anti-apoptosis genes. Clinically, KCOT is frequently involved in the mandibular posterior region but is not common in the posterior maxilla. However, it should be noted that due to its expansive characteristics, KCOT involved near the maxillary sinus could easily expand to an enormous size and occupy the entire maxilla. To achieve total excision of these expanded cystic tumors in the maxilla, a more aggressive approach would be needed. In this report, we describe two cases of expansile KCOT involving the entire unilateral maxilla and maxillary sinus; they were completely excised using the Weber-Ferguson approach, showing no evidence of recurrence during the follow-up period of more than two years. In immunohistochemical analyses of the tumor specimens, p53 and p63 showed strong expression, and B-cell lymphoma 2 (BCL2) and MKI67 (Ki-67) showed moderate or weak expression, however, detection of BCL2-associated X protein (BAX) was almost negative. These data indicate that expansile KCOT possesses increased anti-apoptotic activity and cell proliferation rate but decreased apoptosis. These properties of KCOT may contribute to tumor enlargement, aggressive behavior, and high recurrence rate.

석현(강릉원주대학교) ; 박용태(강릉원주대학교) ; 김성곤(강릉원주대학교) ; 박영욱(강릉원주대학교) pp.188-192
초록보기
초록

Abstract

Post-traumatic anterior open bite can occur as a result of broken balance among the masticatory muscles. The superior hyoid muscle group retracts the mandible downward and contributes to the anterior open bite. Denervation of the digastric muscle by injection of botulinum toxin type A (BTX-A) can reduce the power of the digastric muscle and help to resolve the post-traumatic anterior open bite. A patient with a bilateral angle fracture had an anterior open bite even after undergoing three operations under general anesthesia and rubber traction. Although the open bite showed some improvement by the repeated operation, the occlusion was still unstable six weeks after the initial treatment. To eliminate the residual anterior open bite, BTX-A was injected into the anterior belly of the digastric muscle. Following injection of BTX-A, the anterior open bite showed immediate improvement. Complication and relapse were not observed during follow-up. Long-standing post-traumatic open bite could be successfully corrected by injection of BTX-A into the anterior belly of the digastric muscle without complication.

이상창(경북대학교) ; 김종배(계명대학교) ; 진병로(영남대학교) ; 김진욱(경북대학교) ; 권대근(경북대학교) pp.193-196
초록보기
초록

Abstract

Artecoll (Artes Medical Inc., San Diego, CA, USA) has recently been developed as a permanent synthetic cosmetic filler. We experienced an inflammatory granuloma resulting from a previous injection of Artecoll at the upper lip, which was regarded as a rare side effect of this filler. A 50-year-old female patient complained of swelling, dull pain, and heat in the right upper nasolabial fold area, which had started one week before her visit to Kyungpook National University Hospital. The patient received topical steroid therapy at a local clinic, which was not effective. At the injection site, a hard nodule was palpated and erythema was observed with mild tenderness. Antibiotic treatment and subsequent incision and drainage did not result in complete cure of the facial swelling, and the facial swelling and pain persisted. Computed tomography showed a lesion approximately 1-cm in size without clear boundaries and relatively increased nodular thickening. Finally, a subdermal lesion was removed via an intraoral vestibular approach. The lesion was diagnosed as inflammatory granuloma by a permanent biopsy. The patient had healed at two months after the filler injection. Although the soft tissue filler is widely used for cosmetic purposes, there is potential for complication, such as the inflammatory granuloma should be considered before treatment.

강상훈(국민건강보험공단 일산병원) ; 이재원(국민건강보험공단 일산병원) ; 김문기(국민건강보험공단 일산병원) pp.197-199
초록보기
초록

Abstract

Three-dimensional (3D) computed tomography image models are helpful in reproducing the maxillofacial area; however, they do not necessarily provide an accurate representation of dental occlusion and the state of the teeth. Recent efforts have focused on improvement of dental imaging by replacement of computed tomography with other detailed digital images. Unfortunately, despite the advantages of medical simulation software in dentofacial analysis, diagnosis, and surgical simulation, it lacks adequate registration tools. Following up on our previous report on orthognathic simulation surgery using computer-aided design/computer-aided manufacturing (CAD/CAM) software, we recently used the registration functions of a CAD/CAM platform in conjunction with surgical simulation software. Therefore, we would like to introduce a new technique, which involves use of the registration functions of CAD/CAM software followed by transfer of the images into medical simulation software. This technique may be applicable when using various registration function tools from different software platforms.

Journal of the Korean Association of Oral and Maxillofacial Surgeons