- 권한신청
- P-ISSN2233-8292
- E-ISSN2287-4747
- KCI
ISSN : 2233-8292
A study of diamond wire rock cutting process analysis by FEM
사공명 (한국철도기술연구원)
안성권 (한국철도기술연구원)
- 다운로드 수
- 조회수
Abstract
In this paper diamond wire cutting method has been proposed to cut the rock in the tunnel face. Diamond wire saw method could cut the rock from tunnel face with very minor vibration and noise. In this study rock cutting process has been simulated with FEM method by using LS-DYNA explicit non-linear finite element code. Normal load act as an prime factor when cutting the rock surface. For observing the effect of normal load on bead, several experiments has been conducted by varying normal loads on the bead. From each experiment, cutting rate has been calculated to compare the cutting rate with different load conditions. By increasing the normal load on bead, cutting rate increases drastically.
- keywords
- Diamond wire saw, Rock cutting, FEM, Bead, LS-DYNA
참고문헌
1. Clark, W.I., Shih, A.J., Hardin, C.W., Lemaster, R.L., McSpadden, S.B. (2002), “Fixed abrasive diamond wire machining-part I: Process monitoring and wire tension force”, Machine Tools & Manufacture Vol. 43, pp. 523-532.
2. Gustafsson, N. (2011), “Wire cutting as a complement to drill and blast in vibration sensitive environments”, Masters of Science Thesis in the Master’s Program Geo & Water Enginnering, Chalmers University of Technology.
3. Hallquist, J.O. (2006), “LS-DYNA Theory Manual”.
4. Huang, G., XU, X. (2012), “Sawing performance comparison of brazed and sintered diamond wires,”Chinese Journal of Mechanical Engineering, Vol. 26, No. 1, pp. 393-399.
5. Luo, S.Y., Liao, Y.S. (1995), “Study of the behaviour of diamond saw-blades in stone processing; Materials Processing Technology,”Journal of Materials Processing Technology, Vol. 51, pp. 296-308.
6. Ozcelik, Y., Yilmazkaya, E. (2011), “The effect of the rock anisotrophy on the efficiency of diamond wire cutting machines,” I. J. of Rock Mechanics & Mining Schience, Vol. 48, pp. 626-636.
7. Pang, S.S., Goldsmith, W., Hood, M. (1989), “A force-indentation model for brittle rocks,”
8. Pradeep, L. Menezes, Michael R. Lovell, Ilya V. Avdeev, Jeen-Shang Lin, C. Fred Higgs III, “Studies on the formation of discontinuous chips during rock cutting using an explicit finite element model,” International Journal of Advance Manufacturing Technology Vol. 70, pp. 635-648.
9. Reza, Y., Raheb, B., Amir, K. (2014), “Safety risk assessment of iran’s dimension stone quarries (Exploited by diamond wire cutting method),”Safety Science, Vol. 63, pp. 146-150.
10. Yilmazkaya, E. (2007), “Investigation of some factors affecting block production with diamond wire cutting method”, MSc thesis, Hacettpe University, Ankara.
11. Zhou, Y. (2013), “Numerical modeling of rock drilling with finite elements,” Doctor of Philosophy.
12. Özçelik, Y., Kulaksiz, S., Çetin, M.C. (2002), “Assessment of the wear of diamond beads in the cutting of different rock types by the ridge regression,” Journal of Material’s Technology, Vol. 127, pp. 392-400.
- 다운로드 수
- 조회수
- 0KCI 피인용수
- 0WOS 피인용수