E-ISSN : 2586-6036
Purpose: The purpose of this study is to present an efficient emission reduction ratio of plastic to reduce carbon dioxide, the main cause of greenhouse gases. Research design, data and methodology: This study calculated the absolute value of carbon dioxide by setting an equation through the emission coefficient using the US EPA's WARM model. Results: In the recycling ratio of 70%, it was found that the energy recovery ratio was 15.6%, which was the energy recovery ratio without generating carbon dioxide. When carbon dioxide is generated by changing plastic waste emissions, optimal efficiency is achieved by reducing emissions by 10% to 30% of energy recovery ratio, 20% to 50% of energy recovery ratio, and 30% to 80% or more of energy recovery ratio. Conclusions: The recycling rate should be set at a minimum of 70%, so that a carbon dioxide-free energy recovery rate could be obtained during the recycling process, supporting an eco-friendly basis for environmental policies aimed at this rate. In addition, it was possible to suggest that it is essential to reduce emissions by at least 30% for eco-friendly recycling measures that can achieve both economic and environmental feasibility in the energy recovery process through incineration during recycling in Korea.
Against the backdrop of China's implementation of the "universal two-child" policy, the expansion of higher education, and the narrowing gender gap in the labor market and family status, we investigated the impact of the number of children on parental labor supply and occupational prestige scores using data from the China Family Panel Studies (CFPS) for 2016 and 2018. We found that the influence of children on the parental labor market shifted from labor supply to occupational prestige scores. Heterogeneity analysis reveals a more negative significant adverse impact of younger children on parental labor market performance compared with children over 7 years old. Compared to rural areas, parents in urban areas experience a more significant negative impact from an increase in the number of children. Extended families facilitate rural fathers' employment and leads to a decline in occupational prestige for urban parents.
Purpose: It is necessary to establish more systematic and efficient accident prevention measures in relation to the promotion of safety activities to prevent safety accidents of foreign workers at construction sites, especially as safety accidents of foreign workers continue to occur among industrial accidents occurring at domestic construction sites. In this study, I would like to suggest ways to respond to legal issues related to the recruitment of foreign workers and ways to promote safety management that can effectively reduce industrial accidents through various safety management measures. Research design, data and methodology: In order to establish systematic safety management measures for foreign workers, in-depth research was attempted by collecting and analyzing various data such as the current status of domestic industrial accidents, employment status of foreign workers, and disaster statistics. Results: In addition, I intend to establish and present a more systematic safety management plan by conducting various analysis and feasibility review such as risk assessment education in terms of accident prevention for foreign workers. Conclusions: By establishing and presenting more systematic management measures, such as foreign employment, employment by occupation, and on-site education, this safety management system can effectively prevent accidents for foreign workers and is expected to contribute to the prevention of accidents at domestic construction sites for both construction companies and construction officials.
Purpose: Open-air dumping is a significant problem in Gilgit City, with limited research analyzing waste generation and its physicochemical impact on the soil. This study aimed to evaluate the effects of open dumping on soil properties and compare them with a controlled site. Research Design, data, and Methodology: Using ANOVA, the study found significant differences in electrical conductivity (EC), soil organic matter (SOM), soil organic carbon (SOC), sand, silt, and clay between the two sites, except for pH. Pearson correlation revealed that pH negatively correlated with EC, sand, and silt, but positively with SOM, SOC, and clay. The control site's mean EC was 6.06 mS/m, whereas the dumping site recorded 8.5 mS/m. EC is inversely related to SOM, SOC, silt, and clay, but directly to sand. SOC and SOM values varied significantly, with notable differences in soil texture components like clay and silt. Results: The research highlights the detrimental effects of unsystematic waste dumping on soil health and its contribution to greenhouse gas emissions, particularly methane, which exacerbates climate change. Conclusion: The study concluded that waste deposition and decomposition significantly impact EC, SOM, SOC, and soil texture, though pH remains unchanged. The unsystematic dumping of solid waste contributes to climate change through methane production, a potent greenhouse gas. To mitigate these impacts, the study recommends regular monitoring, waste prevention, recycling strategies, and continuous training for stakeholders to achieve sustainable development.
Purpose: his study aims to explore how healthcare provider service characteristics in telemedicine services, which have become more common since the pandemic, affect rapport formation and service satisfaction with healthcare providers. Research design, data and methodology: A group of actual telemedicine users underwent data collection and empirical analysis. After analyzing reliability and validity, hypotheses were tested using a structural equation model. Results: Key perceived attributes of healthcare providers in telemedicine services were identified as doctor effort, doctor listening, and doctor expertise. Each of these variables had a significant positive impact on trust in telemedicine. Moreover, these attributes significantly positively impacted rapport formation and user service satisfaction, which was mediated by trust. However, the direct impact of rapport formation on service satisfaction was not supported. Conclusions: The study's findings have academic and practical implications for expanding telemedicine services. As an initial empirical study on telemedicine services, it confirms the importance of trust and rapport formation even in non-face-to-face medical situations. In order to overcome the limitations of non-physical contact, telemedicine services should strive to develop UI/UX designs that are more interoperable and boost trust in service apps.
Purpose: This study aims to analyze the status and realities of mental health counseling experiences among adults using the 2022 National Health and Nutrition Examination Survey(NHNES) data. The goal is to provide policy recommendations for enhancing mental health services. Research Methods: Utilizing secondary data analysis of the 2022 survey conducted by the Korea Disease Control and Prevention Agency(KDCPA), this study applied statistical techniques including descriptive statistics, chi-square tests, and logistic regression to evaluate counseling experiences based on age, gender, residential area, and income levels. Results: The study included 5,256 participants, with the highest proportion being those aged 60-69 (21.3%) and the lowest aged 19-29 (11.7%). Females constituted 56.5% of the sample, while males made up 43.5%. Older adults (60-69 and 70+) had significantly lower counseling experience rates compared to younger adults (19-29). Females had higher counseling experience rates than males, indicating gender differences in mental health service utilization. Urban residents had higher counseling experience rates than rural residents, suggesting better access to mental health services in urban areas. Lower income levels were associated with higher counseling experience rates, highlighting the need for targeted mental health support for economically disadvantaged groups. Conclusions: The study recommends developing age-specific, gender-sensitive, and regionally tailored mental health programs to improve accessibility and effectiveness. Additionally, policies should focus on enhancing mental health support for low-income individuals to address the socioeconomic disparities in mental health service utilization.
This study developed a dry composite module-type deodorization facility with Twisting airflow changes and two forms (catalyst, adsorbent) within one module. Experiments were conducted to evaluate the reduction efficiency of odor substances C<sub>8</sub>H<sub>7</sub>N and C<sub>9</sub>H<sub>9</sub>N. The device combines UV oxidation using TiO<sub>2</sub>, catalytic oxidation using MnO<sub>2</sub>, and adsorption using A/C in five different methods. Data analysis of experimental results utilized the statistical package program Python 3.12. The program applied frequency analysis of odor removal efficiency, one-way ANOVA, and post-hoc tests, with statistical significance determined by p-value to ensure reliability and validity of the measurements. Results indicated that the highest removal efficiency of C<sub>8</sub>H<sub>7</sub>N and C<sub>9</sub>H<sub>9</sub>N was achieved by the UV+A/C method, suggesting the superior effectiveness and efficiency of the developed device. Combining multiple processes and technologies within one module enhanced odor treatment efficiency compared to using a single method. The device's modularity allows for flexibility in adapting to various sewage treatment scenarios, offering easy maintenance and cost-effective deodorization. This composite reaction module device can apply multiple technologies, such as biofilters, plasma, activated carbon filters, UV-photocatalysis, and electromagnetic-chemical systems. However, this study focused on UV-photocatalysis, catalysts, and activated carbon filters. Ultimately, the research demonstrates the practical applicability of this innovative device in real sewage treatment operations, showing excellent reduction efficiency and effectiveness by integrating UV oxidation, TiO<sub>2</sub> photocatalysis, MnO<sub>2</sub> catalytic oxidation, and A/C adsorption within a modular system.
Purpose: Since August 2000, the small-scale environmental impact assessment system has prevented indiscriminate development. However, its qualitative reports lack objectivity and consistency. This study analyzes these issues through literature and expert surveys and proposes improvements. Research Methodology: Samples were selected based on regional consultation numbers. Mitigation measures were categorized into qualitative and quantitative factors. Issues were identified, and improvements suggested. The Delphi method helped select evaluation items and propose a scoring table. Results and Conclusions: The Delphi method selected 14 absolute and 22 relative evaluation items, excluding 3 invalid ones. A 100-point scoring table was created, with points assigned based on element significance. A 1-point bonus was added for top-scoring elements to promote eco-friendly planning.