- P-ISSN 1225-0163
- E-ISSN 2288-8985
- 권한신청
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
논문 상세
Home > 논문 상세
Development of a nanoparticle multi-generator for assessment of inhalation hazard
분석과학 / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2021, v.34 no.2, pp.87-98
https://doi.org/10.5806/AST.2021.34.2.87
(Inhalation Toxicology Research Center, Occupational Safety & Health Research Institute)
(Inhalation Toxicology Research Center, OccupationaInhalation Toxicology Research Center, Occupationa)
(Inhalation Toxicology Research Center, Occupational Safety & Health Research Institute)
(Inhalation Toxicology Research Center, Occupational Safety & Health Research Institute)
(Inhalation Toxicology Research Center, Occupational Safety & Health Research Institute)
(Inhalation Toxicology Research Center, OccupationaInhalation Toxicology Research Center, Occupationa)
(Inhalation Toxicology Research Center, Occupational Safety & Health Research Institute)
(Inhalation Toxicology Research Center, Occupational Safety & Health Research Institute)
(Inhalation Toxicology Research Center, Occupational Safety & Health Research Institute)
Sung-Bae,
L.
,
Jeong-Hee,
H.
,
Tae-Hyun,
K.
,
Hyo-Geun,
C.
,
&
Cheal-Hong,
L.
(2021). . 분석과학, 34(2), 87-98, https://doi.org/10.5806/AST.2021.34.2.87
- 다운로드 수
- 조회수
Abstract
In this study, we developed the nanoparticle multi-generator by 3D printer fusion deposition modeling (FDM) method that can reliably generate and deliver nanoparticles at a constant concentration for inhalation risk assessment. A white ABS filament was used as the test material, and SMPS was used for concentration analysis such as particle size and particle distribution. In the case of particle size, the particle size was divided by 100 nm or less and 100 to 1,000 nm, and the number of particles concentration, mass concentration, median diameter of particles, geometric average particle diameter, etc were measured. The occurrence conditions were the extruder temperature, the extruding speed of the nozzle, and the air flow rate, and experiments were conducted according to the change of conditions including the manufacturer's standard conditions. In addition, the utility of inhalation risk assessment was reviewed through a stability maintenance experiment for 6 h. As a result of the experiment, the size of the nanoparticles increased as the discharger temperature increased, as the discharge speed of the nozzle increased, and as the air flow rate decreased. Also, a constant pattern was shown according to the conditions. Even when particles were generated for a long time (6 h), the concentration was kept constant without significant deviation. The distribution of the particles was approximately 80 % for particles of 60 nm to 260 nm, 1.7 % for 1 μm or larger, 0.908 mg/m3 for the mass concentration, 111 nm for MMAD and 2.10 for GSD. Most of the ABS particles were circular with a size of less than 10 nm, and these circular particles were aggregated to form a cluster of grape with a size of several tens to several hundred nm
- keywords
- nanoparticle, 3D printer, multi-generator, inhalation toxicity
참고문헌
1
1. B. Stephens, P. Azimi, E. O. Zeineb and R. Tiffanie, Atmospheric Environment, 79, 334-339 (2013).
2
2. Y. Kim, C. Yoon, S. Ham, J. Park, S. Kim, O. Kwon and P. J. Tsai, Environ. Sci. Technol., 49(20), 12044-12053 (2015).
3
3. Y. Deng, S. J. Cao, A. Chen and Y. Guo, Building and Environment, 104, 311-319 (2016).
4
4. P. Azimi, D. Zhao, C. Pouzet, N. E. Crain and B. Stephens, Environ. Sci. Technol., 50(3), 1260-1268 (2016).
5
5. J. H. Park, H. J. Jeon, K. H. Park and C. S. Yoon, J. Environ. Health Sci., 44(6), 524-538 (2018).
6
6. E. L. Floyd, J. Wang and J. L. Regens, J. Occup. Environ. Hyg., 14(7), 523-533 (2017).
7
7. The Danish Environmental Protection Agency, ‘Risk assessment of 3D printers and 3D printed products’, Environmental Protection Agency, 2017.
8
8. J. M. Suh, W. Bin, S. H. Jang, J. H. Park and J. C. Choi, Journal of Korean Society of Occupational and Environmental Hygiene, 24(4), 453-461 (2014).
9
9. N. Afshar-Mohajer, C. Y. Wu, T. Ladun, D. A. Rajon and Y. Huang, Building and Environment, 93(2), 293-301 (2015).
10
10. A. B. Stefaniak, A. R. Johnson, S. du Preez, D. R. Hammond, J. R. Wells, J. E. Ham, R. F. LeBouf, K. W. Menchaca, S. B. Martin, M. G. Duling, L. N. Bowers, A. K. Knepp, F. C. Su, D. J. de Beer and J. L. du Plessis, Journal of Chemical Health and Safety, 26, 19-30 (2019).
11
11. Y. Zhou, X. Kong, A. Chen and S. Cao, Procedia Engineering, 121, 506-512 (2015).
12
12. A. B. Stefaniak, R. F. LeBouf, M. G. Duling, J. Yi, A. B. Abukabda, C. R. McBride and T. R. Nurkiewicz, Toxicol. Appl. Pharmacol., 335, 1-5 (2017).
13
13. I. Gümperlein, E. Fischer, G. Dietrich-Gümperlein, S. Karrasch, D. Nowak, R. A. Jörres and R. Schierl, Indoor Air, 28(4), 611-623 (2018).
14
14. L. Stabile, M. Scungio, G. Buonanno, F. Arpino and G. Ficco, Indoor Air, 27, 398-408 (2017).
15
15. P. Steinle, Journal of Occupational and Environmental Hygiene, 13, 121-132 (2016).
16
16. http://www.ohmynews.com/NWS_Web/View/at_pg.aspx? CNTN_CD=A0002663757&CMPT_CD=P0010&utm _source=naver&utm_medium=newsearch&utm_campa ign=naver_news, Assessed 3 August 2020.
17
17. http://www.ohmynews.com/NWS_Web/View/at_pg.aspx? CNTN_CD=A0002670018&CMPT_CD=P0010&utm _source=naver&utm_medium=newsearch&utm_campa ign=naver_news, Assessed 25 August 2020.
18
18. OECD Guidelines on the testing of chemicals Section 4Health Effects Test No. 412 (25 June 2018), OECD.
19
19. OECD Guidelines on the testing of chemicals Section 4Health Effects Test No. 413 (25 June 2018), OECD.
20
20. Dekati. In ‘ELPI+ User manual’, Ver.1.12 p.60, Dekati Ltd.; 2011.
권호 내 다른 논문
- Development of Jaspine B analysis using LC-MS/MS and its application: Dose-independent pharmacokinetics of Jaspine B in rats
- Gliclazide compatibility with some common chemically reactive excipients; using different analytical techniques
- A preliminary study of semi-quantitative, comparative evaluation of split or half fingerprints using Densitometric Image Analysis (DIA) - Inter-analyst differences for split or half fingerprints -
- Development and validation of a qualitative GC-MS method for THCCOOH in urine using injection-port derivatization
- Determination of cut-off value by receiver operating characteristic curve of norquetiapine and 9-hydroxyrisperidone concentrations in urine measured by LC-MS/MS
- Development of a nanoparticle multi-generator for assessment of inhalation hazard
- more
추천 논문
학술지 홈페이지 이용 환경은 크롬 브라우저 사용을 권장합니다.