- P-ISSN 1225-0163
- E-ISSN 2288-8985
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
논문 상세
Home > 논문 상세
ABS 중 phthalates 가소제 CRM 개발에 대한 연구
A study on the development of phthalate plasticizers CRM in ABS resin
분석과학 / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2012, v.25 no.5, pp.273-283
https://doi.org/10.5806/AST.2012.25.5.273
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(호남석유화학(주)대덕연구소)
(호남석유화학(주)대덕연구소)
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(한국화학융합시험연구원)
(호남석유화학(주)대덕연구소)
(호남석유화학(주)대덕연구소)
정정설,
박정우,
유석,
권성일,
홍성택,
선일식,
박천민,
&
최창휴.
(2012). ABS 중 phthalates 가소제 CRM 개발에 대한 연구. 분석과학, 25(5), 273-283, https://doi.org/10.5806/AST.2012.25.5.273
- 다운로드 수
- 조회수
초록
현재 RoHS 및 REACH, CPSC 등에서 phthalates 가소제를 유해물질로 분류하여 규제하고 있는실정이다. 이러한 국제환경규제에 대응하기 위해 phthalates 가소제 정량분석용 ABS 인증표준물질을 개발하였으며 인증 대상물질은 DMP, DEP, DBP, BBP, DEHP, DnOP이다. 후보물질은 전기·전자제품에 많이 사용되고 있는 ABS 수지에 phthalates 가소제 6가지 물질을 혼합한 후 쌍축압출기(twin screw extruder)를 이용하여 압출, 냉각, 펠렛, 건조의 과정을 거쳐 제조하였으며 ISO Guide 35의 절차에 따라 인증하였다. 동위원소희석 질량분석법(ID-GC/MS)을 이용하여 균질성, 단기안정성 및 장기안정성을 평가하였으며, 소급성 확립을 위해 한국표준과학연구원(KRISS)의 일차표준물질을 이용하여 인증값을 결정하였다. 향후인증표준물질로서 인증을 받은 후, 국제 표준물질 데이터베이스(COM AR:code of reference material)에등록하고 국내·외 산업체 및 시험기관에 보급할 예정이다.
- keywords
- phthalate plasticizers, CRM, ABS, hazardous substance, traceability
Abstract
Phthalate plasticizers are regulated by RoHS, REACH and CPSC as hazardous substances. Responding to these international environmental restrictions, we developed ABS certified reference material (CRM) for determination of phthalate plasticizers such as DMP, DEP, DBP, BBP, DEHP and DnOP. The candidate material has been made with ABS resin widely used in electric and electronic products and 6 kinds of phthalate plasticizers. The making of the material involved a series of processes like extruding, cooling, pelletizing, and drying using twin screw extruder. Then it has been certified according to ISO Guide 35. Using isotope dilution-gas chromatography/mass spectrometry (ID-GC/MS), homogeneity, short-term stability, and long-term stability were evaluated. The certified values were determined by using primary reference material (PRM) of KRISS for traceability. From now on, we will provide ABS CRM to national and international companies and research institutes after certification as certified reference material and registering on COMAR (code of reference material).
- keywords
- phthalate plasticizers, CRM, ABS, hazardous substance, traceability
참고문헌
1
1. KOLAS-G-015, Guide for chemical method validation (2012).
2
2. KS M 0027, General rules for analytical methods in gas chromato-graphy mass spectrometry (2008).
3
3. KS M 0124, Technical terms for analytical chemistry(Analytical instru-ment part) (2011).
4
4. KS M 0126, Technical terms for analytical chemistry(General part) (2011).
5
5. KS M 1991, Determination of phthalates contents in polymer materials (2011).
6
6. KS I 3226, Method for determination of tetra-through octa-chloro-dibenzo-p-dioxine, tetra-through octa-chlorodibenzofurans and coplanar polychlorobiphenyls in industrial water and wastewater (2009).
7
7. US EPA 8280B, Polychlorinated dibenzo-p-dioxins (PCDDs) and poly-chlorinated dibenzofurans (PCDFs) by high-resolution gas chromato-graphy/low-resolution mass spectrometry (HRGC/LRMS) (2007).
8
8. KS Q 5002, Statistical interpretation of data-Part 1 : Statistical presentation of data (2008).
9
9. ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (2005).
10
10. ISO Guide 30, Terms and definitions used in connection with reference materials (1992).
11
11. ISO Guide 31, Reference materials-Contents of certificates and labels (2000).
12
12. ISO Guide 32, Calibration in analytical chemistry and use of certified reference materials (1997).
13
13. ISO Guide 33, Uses of certified reference materials (2000).
14
14. ISO Guide 34, General requirements for the competence of reference material producers (2009).
15
15. ISO Guide 35, Reference materials-General and statistical principles for certification (2006).
16
16. I.-J. Kim and K.-H. Cho, Anal. Sci. Technol., 23(5), 485-491 (2010).
17
17. B. Griepink, E. A. Maier, H. Muntau and D. E. Wells, “The certification of the contents of six chlorobiphenyls (Nos. 28, 52, 101, 118, 153 and 180) in dried sludge”, EUR 12823 EN (1990).
18
18. A. Lamberty, W. Van Borm and Ph. Quevauller, Certification report of BCR-680 and BCR-681, IRMM, Belgium (2001).
19
19. “Guide to the Expression of Uncertainty in Measurement, 1stEd.”, ISO, Switzerland (1993).
20
20. ISO/IEC 17043, Conformity assessment-General requirements for proficiency testing (2010).
21
21. Report of the federal advisory committee on detection and quantitation approaches and uses in clean water act programs, US EPA (2007).
권호 내 다른 논문
- 도파관식 고출력 헬륨 플라즈마의 개발과 분광학적 특성 연구
- ABS 중 phthalates 가소제 CRM 개발에 대한 연구
- 화학시약들을 이용한 지류에서 혈흔지문 증강에 관한 연구
- HS-SPME GC/MS법을 이용한 일본왕개미의 trail pheromone 성분 분석
- 조선시대 회곽묘 출토 미이라의 안정동위원소 분석으로 생애 주기에 따른 식생활 변화 추적
- 흡입챔버 내 didecyldimethylammonium chloride(DDAC) 에어로졸의 분석
- 우리나라 주요 하천수 및 퇴적토에 축적된 과불화화합물의 분포특성
- OSL 연대측정을 통한 풍납토성 축조연대 산출
- IQGAP3에 존재하는 IQ 부위의 칼모듈린 결합 특성
- more
추천 논문
학술지 홈페이지 이용 환경은 크롬 브라우저 사용을 권장합니다.