- P-ISSN 1225-0163
- E-ISSN 2288-8985
- Apply for Authority
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
Article Detail
Home > Article Detail
Thermal residues analysis of plastics by FT-near infrared spectroscopy
Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2017, v.30 no.5, pp.234-239
https://doi.org/10.5806/AST.2017.30.5.234
&
(2017). Thermal residues analysis of plastics by FT-near infrared spectroscopy. Analytical Science and Technology, 30(5), 234-239, https://doi.org/10.5806/AST.2017.30.5.234
- Downloaded
- Viewed
Abstract
Identifying the components of residues that are not completely burned at the sites of fires site can provide valuable information for tracing the causes of fires. In order to clarify the types of plastic combustion residues found at the scenes of fires, we studied the residue formed after the combustion of polyethylene (PE) and acrylonitrile butadiene styrene (ABS). Plastic samples were burned at 200, 300, 350, 400, and 500 °C for 3 min using a cone calorimeter, and the changes in weight and combustion products were observed. The powder products obtained by lyophilization and pulverization of the combustion products obtained at each temperature were analyzed by a Fourier transform-near infrared (FT-NIR) spectrometer. When the PE samples were burned, the weight did not change up to 350 °C, however a significant change in the weight could be measured above 400 °C. The principal component analysis (PCA) of the FT-NIR spectra of the PE and ABS samples obtained at each temperature confirmed that the combustion residues at each temperature were PE and ABS, respectively. Therefore, the types of unburned plastics found at the sites of fires can be confirmed rapidly by near infrared spectroscopy.
- keywords
- Plastic, Fire residues, Cone calorimeter, Near infrared spectrometer (NIRS), Principle component analysis (PCA)
Reference
1
1. K. Lee and K. Kim, J. Kor. Inst. Fire Sci. & Eng., 17(1), 76-83 (2003).
2
2. B. Lim and H. An, J. Kor. Inst. Gas., 20(1), 46-51 (2016).
3
3. F. T. Walder and M. J. Smith,, Spect. Acta, 47, 1202-1216 (1991).
4
4. Williams, Phil and Norris Karl, “Near-Infrared Technology in the Agricultural and Food Industry”, American Association of Cereal Chemists, Inc., Minnesota, U.S.A., 201. 1987.
5
5. J. W. Hall and A. Pollard, Clim. Chem., 38(9), 1623-1631 (1992).
6
6. J. D. Kirsch and J. K. Drennen, J. Pharm. Biomed. Anal., 13, 1273-1281 (1995).
7
7. L. Weyer, Appl. Spectrosc. Rev., 21, 1-43 (1985).
8
8. H. Masoumi, S. Safavi and Z. Khani, Mechatronic and Manufacturing Eng., 6(5), 877-884 (2012).
9
9. V. Venkatasubramanian, R. Rengaswamy, S. Kavuri and K. Yin, Comput. Chem. Eng., 27, 327-346 (2003).
10
10. C. Han and E. S. Yoon, Chem. Res., 43(25), 8037-8048(2004).
11
11. C. W. Brown, P. E. Lynch, R. J. Obremski and D. S. Lavery, Anal. Chem., 54, 1472 (1982).
12
12. ISO/FDIS 5660-1, “Reaction to Fire Tests - Heat Release, Smoke Production and Mass Loss Rate - Part 1 : Heat Release (Cone calorimeter method)”, ASTM E1354, 2002.
13
13. CAN/ULC-S135-92, “Standard Method of Test for Determination of Degrees of Combustibility of Building Materials Using an Oxygen Consumption Calorimeter (Cone calorimeter)”, National Standard of Canada, Underwriters' Laboratories of Canada, Scarborough, Ont., Canada, 1992.
Other articles from this issue
- An HPLC method for the determination of thioctic acid in raw material and tablets
- Purity assignment of 17β-estradiol by mass balance method
- Thermal residues analysis of plastics by FT-near infrared spectroscopy
- Determination of trace impurities of HFC-134a by gas chromatograph with atomic emission detector (GC/AED)
- Method development for quantitative analysis of naturally occurring radioactive nuclides in building materials
- Distribution of natural radionuclide in the Geum river sediment
- The study on the penetration and washing features of blood on the surface of fabric
- A preliminary study to determine the order of the latent fingerprint deposition on thermal paper − A short term study −
- Development of standard gas mixtures of hydrocarbons in methane contained in aluminum cylinders
- Analytical method validation and monitoring of levulinic acid in soy sauce and their application to food
- more
Recommanded Articles
This website recommended the use the Chrome browser for journal website.