- P-ISSN 1225-0163
- E-ISSN 2288-8985
The technique that could collect efficiently the hanji fibrous sludge from wastewater using surfactants was developed. When fibrous sludge of which concentration was about 80mg/L, was floated and collected, the optimum concentration of sodium oleate, the pore size of glass filter and the air flow rate were 10mg/L, <TEX>$5-10{\mu}m$</TEX> and 200mL/min., respectively. The behavior of sodium oleate might be interfered by polyvalent cations such as <TEX>$Ca^{2+}$</TEX>. But when the concentration of <TEX>$Ca^{2+}$</TEX> was less than 100mg/L, the interference effect did not appear. And when a typical cationic surfactant, cetyltrimethylammonium bromide(CTAB), was used, the collecting yield was less than that of sodium oleate, and the amount of foam was higher than sodium oleate. When 1mg/L of CTAB was added to the hanji sludge sample contained 1mg/L of <TEX>$PAMID^{(R)}$</TEX>, a dispersant, fibrous sludge was effectively coagulated, the flotation time was very short and the collecting yield was above 95%. But in the case, sodium oleate was inefficient.