- P-ISSN 1225-0163
- E-ISSN 2288-8985
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
Article Detail
Home > Article Detail
Determination of copper(Ⅱ) in various samples by flame atomic absorption spedtrophotometry after column separation by adsorption of its N-benzoylphenylhydroxylamine complex on benzophenone
Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2007, v.20 no.1, pp.55-60
&
(2007). Determination of copper(Ⅱ) in various samples by flame atomic absorption spedtrophotometry after column separation by adsorption of its N-benzoylphenylhydroxylamine complex on benzophenone. Analytical Science and Technology, 20(1), 55-60.
- Downloaded
- Viewed
Abstract
A sensitive technique for the determination of trace Cu(II) in various samples after the column preconcentration by adsorbing its N-benzoylphenylhydroxylamine (BPHA) onto benzophenone was developed. Several experimental conditions such as the pH of the sample solution, the amount of chelating agent, the amount of benzophenone, and the flowrate of sample solution and so forth were optimized. The interfering effects of diverse concomitant ions were investigated. Fe(III) and <TEX>$CN^-$</TEX> interfered with more seriously than any other ions. However, the interference by these ions could be overcome sufficiently by adjusting the added volume of 0.01M BPHA to 10 mL. The dynamic range, the correlation coefficient (<TEX>$r^2$</TEX>) and the detection limit obtained by this proposed technique were 5.0~120 ng/mL, 0.9974, and 2.1 ng/mL, respectively. For validating this proposed technique, the aqueous samples (stream water, reservoir water, and wastewater), the plastic sample and the diluted brass sample were used. Recovery yields of 93~102% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. This method was also validated by the rice flour CRM (normal, fortified) samples. Based on the results from the experiment, it was found that this proposed technique could be applied to the determination of Cu(II) in various real samples.
- keywords
- preconcentration, N-benzoylphenylhydroxylamine, benzophenone, Copper(II)
Reference
1
C. N. Sawyer, (1996) ？Chemistry for Environmental Engineering？, McGraw-Hill, New York, U.S.A.
2
Z. Kowalewska, (2005) Spectrochim,
3
Welcher, (1973) ？Standard methods of chemical analysis？, Krieger PublishingCo
4
D. A. Skoog, (1998) ？Principles of instrumental analysis？,, 13, Saunders College Publishing, Philadelphia, U.S.A.
Other articles from this issue
- Mixed Bacillus sp. BOD sensor
- Distribution characteristics of dioxin concentration in pyrolysis-gasification-melting process facilities
- Characteristics of concentration distribution for indoor air pollutants (VOCs and Carbonyl compounds) in new apartments
- Comparison and evaluation of methods for the measurement of total nitrogen in wastewater
- Chemical characteristics and sources of fine ambient particulate matter from the third and fourth industrial complex area of Daejeon city, Korea
- Analytic study on lead and cadmium in glass materials
- Investigations with respect to the electrochemical properties of carbon paste electrode fabricated using polybutadiene binder
- Determination of copper(Ⅱ) in various samples by flame atomic absorption spedtrophotometry after column separation by adsorption of its N-benzoylphenylhydroxylamine complex on benzophenone
- Theoretical investigation for the molecular structure and Charge transport property analysis of C<sub>16</sub>H<sub>16</sub>O<sub>3</sub> as a candidate of liquid-crystal
- Analysis of 12 chlorophenols in waste-water using automated liquid phase microextracion (LPME) device
- Proficiency test for analyzing illegal compounds in food
- Levels of sulfonamides for animals in food
- more
Recommanded Articles
This website recommended the use the Chrome browser for journal website.