- P-ISSN 1225-0163
- E-ISSN 2288-8985
- Apply for Authority
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
Article Detail
Home > Article Detail
The TVOC management level evaluation of adhesive product following to simultaneous revision of indoor air quality testing methods and standards
Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2010, v.23 no.3, pp.255-260
https://doi.org/10.5806/AST.2010.23.3.255
&
(2010). The TVOC management level evaluation of adhesive product following to simultaneous revision of indoor air quality testing methods and standards. Analytical Science and Technology, 23(3), 255-260, https://doi.org/10.5806/AST.2010.23.3.255
- Downloaded
- Viewed
Abstract
The Ministry of Environment simultaneously revised testing methods and emission standards of adhesives product on the 『Law of indoor air quality management』 for the effective management of the building materials releasing pollutants in great quantities. Accordingly, it is impossible to compare original standards with revised standards directly. The influences of each factor of the revised testing methods of adhesive product on the emission rate of pollutants are reviewed through comparing with the original testing method. Through this study, revised pollutant emission control standards were assessed. With the result that it is found that emission rate of adhesives product is weakened two and half times by changing test period and the emission rate resulting from changing drying time has little difference. As a result of comparing TVOC emission standards with the original testing method considering the modification of testing methods, it is found that the emission standard through this revision is strengthened about 2.1 times more than that of present testing method.
- keywords
- adhesives, small chamber, TVOC, building materials
Reference
1
1. 환경부, “실내공기질공정시험방법” (2004).
2
2. 일본건축학회 저, 김현중 역, “새집증후군 대책의 바이블”, 1판, p.95-97, 선진문화사 2004.
3
3. 환경부, “실내공기질공정시험기준” (2008).
4
4. 장성기, “오염물질 방출 시험방법 개선 방향 및 관리 방안”, 친환경 건축자재 및 제품의 평가기술 발전 방향 기술 세미나 자료 (2008).
5
5. 장성기, 서수연, 박현주, 임정연, 임준호, 이우석, 한국실내환경학회지, 액상 건축자재의 기간별 TVOC 방출량 특성에 관한 고찰, 4(2), 140-153(2007).
6
6. 강윤경, 김현진, 이윤규, 한국실내환경학회지, 소형챔버를 이용한 건축자재의 휘발성유기화합물과 폼알데하이드 방출량 평가, 5(3), 185-195(2008).
7
7. ISO 16000-9. Determination of the emission of volatile organic compound from building products and furnishing- emission chamber method (2006).
8
8. 신우진, 이철원, 김만구, 한국분석과학회지, 건축자재에서 방출되는 오염물질 평가 시 사용되는 20 L 시험챔버 시편홀더의 기밀성 개선, 20(4), 261-267(2007).
Other articles from this issue
- Characterization of Fe-ACF/TiO2 composite and photocatalytic activity for MB Solution under visible light
- Fabrication of ordered porous nanocomposite materials using templating
- Determination and preconcentration of Cu(II) using microcrystalline p-Dichlorobenzene loaded with salicylaldoxime
- Estimation on the application of Reference Materials for PCBs Proficiency Testing from the transformer oil
- The TVOC management level evaluation of adhesive product following to simultaneous revision of indoor air quality testing methods and standards
- Assessment of PCBs-containing solid wastes using official wastes test method
- Distribution and emission source of PAHs in ambient air of Seoul
- Comparison of three analytical methods for PCBs-containing liquid wastes
- Evaluation of the proficiency testing results using river water-based reference materials for heavy metal analysis
- Preparation of wastewater-based reference materials for heavy metal analysis and interlaboratory study
- The study of nondestructive evaluation method of paper records materials by NIR spectroscopy
- Distribution and exposure assessment of indicator PCBs in Food
- Analysis of rifle and pistol primer gunshot residue using SEM-EDX
- more
Recommanded Articles
This website recommended the use the Chrome browser for journal website.