- P-ISSN 1225-0163
- E-ISSN 2288-8985
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
Article Detail
Home > Article Detail
Determination of Trace Iodide in Sodium Bisulfite Aqueous Solution by Ion Chromatography with UV Detection
Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2000, v.13 no.3, pp.304-308
Park,
Y., Kim,
D., Choi,
K., Park,
S., &
Han,
S.
(2000). Determination of Trace Iodide in Sodium Bisulfite Aqueous Solution by Ion Chromatography with UV Detection. Analytical Science and Technology, 13(3), 304-308.
- Downloaded
- Viewed
Abstract
The iodide was recovered from a simulated spent fuel to the sodium bisulfite aqueous solution. It was discussed that the trace iodide (below 1 ppm) was determined without the matrix effect of 0.1 M sodium bisulfite and 1 mM <TEX>$HNO_3$</TEX> in aqueous solution by ion chromatography with UV detection. AS4A-SC (DIONEX) column and UV-absorption spectrophotometer were used. The UV-absorption spectra of sodium bisulfite, nitric acid and iodide were obtained, and then 230 nm was selected as an absorption wavelength for iodide determination. 0.1 M NaCl eluent was optimum condition. In this condition the calibration curve of iodide was obtained on the range of about 0-1,000 ppb. The linear coefficient was 0.99993 and the detection limit was 5 ppb. The relative standard deviation was 1.26%.
- keywords
- Iodide, Sodium bisulfite, Ion chromatography, UV detection
- Downloaded
- Viewed
- 0KCI Citations
- 0WOS Citations
Other articles from this issue
- Uncertainty in Measurements and Analyses (2) - Expression and Calculation of Uncertainty by the International Rule ( GUM ) -
- Retention of Benzoic Acids in RPLC
- Determination of Volatile Organic Compounds (VOCs) in Drinking Water using Solid Phase Microextraction (SPME)
- Analyses of Additives Applied in a Polycarbonate
- Direct Determination of Molybdenum in Simulated Nuclear Spent Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry
- Determination of Cadmium, Copper, Lead, Nickel, and Zinc in Sediments by ID-ICP/MS
- Determination of Trace Iodide in Sodium Bisulfite Aqueous Solution by Ion Chromatography with UV Detection
- Quantitative Analysis of Trace Metals in Lithium Molten Salt by ICP-AES
- Spinach Root-Tissue Based Amperometric Biosensor for the Determination of Hydrogen Peroxide
- Selective Separation of Zr(IV) and Th(IV) by (polystyrene-divinylbenzene)-thiazolylazo Chelating Resins(I)
- The Properties of Carbonaceous Desiccant Derived from Phenolic Resin
- Synthesis and Characterization of Intercalation Compounds of Alkylsulfonate into Hydrated and Dehydrated Zinc
- Induction of Boiling Stable Proteins by Cold and ABA Treatment in Radish Cotyledon and Hypocotyl
- Decolorization of Wastewater and Collecting of Sludge from Hanji Production
- Analysis for 16 Polynuclear Aromatic Hydrocarbons (PAH) in Sewage Sludge and Soil
- Adsorption Characteristics of the Heavy Metals, Cd(II) and Pb(II) Ions, on the Si-immobilized Sargassum horneri
- Simultaneous Analytical Techniques for Determination of 8 Synthetic Food Colors in Foods by HPLC
- Analysis of Amineptine and its Metabolites in Human Urine by Gas Chromatography/Mass Spectrometry
- Removal of Heavy Metal Ions by Using Natural Zeolite Comixed with Montmorillonite
- Application of Reversed-Phase Solid Phase Extraction for the HPLC Analysis of Microcystins in Water
- Uncertainty in Measurements and Analyses (II) - Expression and Calculation of Uncertainty by the International Rule (GUM) -
- more
Recommanded Articles
This website recommended the use the Chrome browser for journal website.