- P-ISSN 1225-0163
- E-ISSN 2288-8985
The effects of physico-chemical properties of soils on PCBs analysis in Korea was studied Three kinds of extraction solvents(toluene, acetone:hexane, dichloromethane) was selected to apply three different soils. The silicagel, florisil and alumina column cleanup also performed to compare the elution patterns, and three different methods (EPA, Japan, Proposed method in this study) of 62 PCBs also compared the individual peaks recoveries. The solvent average recovery was surveyed the order of toluene, acetone:hexane, dichloromethane as 77.94%, 58.59%, 54.20% for soil A, 53.65%, 80.32%, 68.27% for soil B and 44.52%, 60.35%, 56.36% for soil C, respectively. The average recovery was depended on the soil characters. The highest recoveries of each soil were obtained the toluene for soil A, acetone:hexane for soil B and C. However, the coplanar PCBs was obtained the highest recovery with dichloromethane. Thus, to select the solvent for the analysis of PCBs in solid, the selected compounds have to consider to get good result. The silicagel, florisil, alumina I and alumina II column cleanup process were surveyed the range of 38.73%~98.26%, and the higher chlorinated compounds was obtained the lower recovery compared to the low chlorinated compounds, generally. This results are also consistent with the coplanar PCBs isomers. The compared results of three different countries were obtained the 37.15% for USA, 45.92% for Japan and 44.46% for proposed method in this study.