- P-ISSN 1225-0163
- E-ISSN 2288-8985
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
Article Detail
Home > Article Detail
Distribution of heavy metals and mercury in sediment from the lake An-dong
Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2012, v.25 no.6, pp.441-446
https://doi.org/10.5806/AST.2012.25.6.441
&
(2012). Distribution of heavy metals and mercury in sediment from the lake An-dong. Analytical Science and Technology, 25(6), 441-446, https://doi.org/10.5806/AST.2012.25.6.441
- Downloaded
- Viewed
Abstract
In this study, mercury, methylmercury and heavy metals in sediment from the lake Andong were analyzed,along with the estimation of mercury flux between sediments and water in the lake Andong. Average mercury concentrations in sediments sampled in 2009~2011 were 155.0±71.9 ng/g, 211±62 ng/g and 198±6.88 ng/g,respectively. The average methylmercury concentration were 1.85±1.09 ng/g (2009) and 3.49±1.79 ng/g (2011), and %methylmercury, the fraction of methylmercury in total mercury were 1.17±0.39% and 1.77±0.94%, respectively. Heavy metal (Zn, Cd, Pb, Cu) concentrations of the sediments exceeded ERL (Effect Range Low) level of US NOAA (National Oceanic and Atmospheric Administration)'s sediment quality criteria. Estimated mercury sedimentation flux was found to be 83.7 ng/cm2·yr and mercury diffusion flux was estimated as 1.24 ng/cm2·yr.
- keywords
- mercury, methylmercury, heavy metal, sediment, sedimentation rate, diffusion flux
Reference
1
1. N. Pirrone, S. Cinnirella, X. Feng, R. B. Finklman, H. R. Friedli, J. Leaner, R. Mason, A. B. Mukherjee, G. B. Stracher, D. G. Streets and K. Telmer, Atmos. Chem. Phys., 10, 5951-5964 (2010).
2
2. UNEP. Global Mercury Assessment. UNEP-Chemicals, Geneva, 2002.
3
3. F. Sprovieri, N. Pirrone, M. S. Landis and R. K. Stevens, Atmos. Environ., 39, 7646-7656 (2005).
4
4. M. Horvat, L. Liang and N. S. Bloom, Anal. Chim. Acta, 282, 153-168 (1993).
5
5. US EPA method 1630, ‘Methylmercury in water by distillation, aqueous ethylation, purge and trap, and CVAFS’, 2001.
6
6. Kyungpook Regional Environmental Technology Center, “The environmental assessment and proper management of downriver district caused by closed and temporarily-closed mines in upriver district of Nakdong River-The research of environmental assessment of mineral-mixed deposits in the riverbed of upriver district”, 2005.
7
7. M. Byeon, J. Lee, J. Park, S. Shin, J. Han and Y. Kim. Anal. Sci. Technol., 23(5), 492-497 (2010).
8
8. USEPA, SW-846 Method 7473: “Mercury in Solids and Solutions by Thermal Decomposition Amalgamation and Atomic Absorption Spectrophotometry”, 2005.
9
9. D. N. Edington, J. A. Robbines, “Determination of the activity of lead-210 in sediments and soils”. In : Lake Michigan Mass Balance Study, Vol 3, 1975. Available online at www.gov/greatlakes/lmmb/methods
10
10. Ministry of Environment, “National Survey on mercury bioaccumulation in freshwater fish”, Ministry of Environment, Republic of Korea, 2009.
11
11. US NOAA, Sediment Quality Guidelines developed for the National Status and Trends Program, 1999.
12
12. P. R. Mason and A. L. Lawrence, Environ. Toxicol. Chem., 18(11), 2438-2447 (1999).
13
13. P. K. Lee, S. J. Youm, Y. S. Shin, S. J. Chi, J. W. Kim, C. W. Oh and S. O. Kim J. Soil & Groundwater Env., 10(1), 43-57 (2005).
14
14. K. Y. Choe, G. A. Gill, R. D. Lehman, S. Han, W. A. Heim and K. H. Coale, Limnol. Oceanogr., 49, 1512-1527 (2004).
Other articles from this issue
- Comparison of chemical and photochemical generation of hydrides in Se speciation study with HPLC-HG-ICPMS
- Property analysis of polysilane precursors and applications for polysilicon
- Uncertainties of ionic species in snowpit samples determined with ion chromatography system
- Development of analytical method for Isotianil in agricultural commodities using GC-NPD and GC-MSD
- The study for analysis of acidity and moisture in paper record by mobile small NIR spectrometer
- NMHCs measurement using a cryogenic concentration system and application on gas samples
- Determination of the mole fractions of ethylene oxide and freons in medical liquefied gas mixture by GC/AED
- A study on the massive cultivation of cyanobacteria and strip analysis of cyanobacterial toxin
- Development of the testing method for vinyl chloride monomer (VCM) in polyvinyl chloride(PVC) samples
- Analytic study on arsenic content in plastic materials
- Fundamental study on the development of the testing method of Triclosan with GC/ECD and GC/MS
- Characteristics of heavy metals's exposure from playground flooring
- Characteristics of organic pollutants in discharged industrial waste in Korea - Focuse on metallic and plastic manufacturing processes and wastewater treatment plants -
- Tracking lead contamination sources of sediments in Lake Andong using lead isotopes
- Determination of perchlorate in the Gum-River surface water by LC-ESI-MS/MS
- Distribution of heavy metals and mercury in sediment from the lake An-dong
- Emission characteristics of odor from salted food materials using Spam
- Environmentally friendly determination of urinary trans, trans-muconic acid for biological monitoring of benzene exposure by green high-performance liquid chromatography
- Simultaneous determination of ultra-trace phenols, polycyclic aromatic hydrocarbons and pesticides in surface water by gas chromatography-mass spectrometry
- Characterization of Asian dust using steric mode of sedimentation field-flow fractionation (Sd/StFFF)
- Study on stability test of in process sample of recombinant Protein A
- more
Recommanded Articles
This website recommended the use the Chrome browser for journal website.