• P-ISSN1225-0163
  • E-ISSN2288-8985
  • SCOPUS, ESCI, KCI

Article Detail

Home > Article Detail
  • P-ISSN 1225-0163
  • E-ISSN 2288-8985

Article Contents

    Study on the production of porous CuO/MnO2 using the mix proportioning method and their properties

    Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
    2015, v.28 no.3, pp.182-186
    https://doi.org/10.5806/AST.2015.28.3.182





    • Downloaded
    • Viewed

    Abstract

    In this study, the porous CuO/MnO2 catalyst was prepared through the co-precipitation process from an aqueous solution of potassium permanganate (KMnO4), manganese(II) acetate (Mn(CH3COO)2·4H2O) and copper(II) acetate (Cu(CH3COO)2·H2O). The phase change in MnO2 was analyzed according to the reaction molar ratio of KMnO4 to Mn(CH3COO)2. The reaction mole ratio of KMnO4 to Mn(CH3COO)2·4H2O was varied at 0.3:1, 0.6:1, and 1:1. The aqueous solution of Cu(CH3COO)2 was injected into a mixed solution of KMnO4 and Mn(CH3COO)2 to 10~75 wt% relative to MnO2. The Cu ion co-precipitates as CuO with MnO2 in a highly dispersed state on MnO2. The physicochemical property of the prepared CuO/MnO2 was analyzed by using the TGA, DSC, XRD, SEM, and BET. The different phase types of MnO2 were prepared according to the reaction mole ratio of KMnO4 to Mn(CH3COO)2·4H2O. The results confirmed that the porous CuO/MnO2 catalyst with γ-phase MnO2 was produced in the reaction mole ratio of KMnO4 to Mn(CH3COO)2 as 0.6:1 at room temperature.

    keywords
    catalyst, leaching, stench, adsorbent


    Reference

    1

    1. K, Waak and C. F. Warner, ‘Air Pollution Its Origin and Control’, Harper and Row, 1981.

    2

    2. C. D. Cooper and F. C. Alley, ‘Air Pollution Control : A Design Approach’, Waveland Press, 1994.

    3

    3. E. S. Cho and Y.-S. Park, Odor Res. and Eng., 8(2), 78-84 (2009).

    4

    4. J. H. Lee and S. H. Kang, J. of Kor. Society of Water and Wastewater, 21(5), 621-629. (2007).

    5

    5. E. C. Jeon, J. H. Sa, S. T. Kim, J. H. Hong and K. H. Kim, J. of Kor. Society Atmospheric Environ., 22(3), 337-351. (2006).

    6

    6. B. J. Song, J.-E. Jeong, S.-Y. Jeong and J.-G. Won, J. Kor. Society of Waste Management, 21(2), 107-116. (2004).

    7

    7. E. C. Moretti and N. Mukhopadhyay, Chem. Eng. Prog., July, 20-26 (1993).

    8

    8. M. A. Palazzolo, ‘Control of industrial VOC emissions by catalytic incineration’, Research Triangle Park, NC, U. S. Environmental Protection Agency, 1985.

    9

    9. H. C. Han, ‘Study on the Treatment Characteristics of VOCs by Catalytic Combustion’ Ph. D. Dissertation, Myongji University, Korea, Yong-in, 1994.

    10

    10. G. Ramis, C. Yi, G. Busca, M. Turco, E. Kotur and R. J. Willy, Adsorption, J. Cat., 157(2), 523-535 (1995).

    11

    11. Z. Zhu, Z. Liu, S. Liu and H. Nia, App. Cat. B: Environ., 30(3-4), 267-276 (2001).

    12

    12. Y. Li and J. N. Armor, App. Cat. B: Environ., 13(2), 131-139 (1997).

    13

    13. J. Y. Lee, S. B. Kim and S. C. Hong, Chemosphere, 50(8), 1115-1122 (2003).

    14

    14. S. S. Kim and S. C. Hong, T, J. Kor. Ind. Eng. Chem., 18, 255 (2007).

    15

    15. T. Yamashita and A. Vannice, App. Cat. B: Environ., 13(2), 141-155 (1997).

    16

    16. S. C. Hong, Kor. Chem. Eng. Res., 43(2), 278-285 (2005).

    상단으로 이동

    Analytical Science and Technology