- P-ISSN 1225-0163
- E-ISSN 2288-8985
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
Article Detail
Home > Article Detail
The characteristics of dye-sensitized solar cells using carbon nanotube in working and counter electrodes
Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2014, v.27 no.6, pp.308-313
https://doi.org/10.5806/AST.2014.27.5.308
&
(2014). The characteristics of dye-sensitized solar cells using carbon nanotube in working and counter electrodes. Analytical Science and Technology, 27(6), 308-313, https://doi.org/10.5806/AST.2014.27.5.308
- Downloaded
- Viewed
Abstract
The effect of electrochemical characteristics of dye-sensitized solar cells (DSSC) upon employingmulti-wall carbon nanotube (MWCNT) on both working electrode and counter electrode were examined withusing EIS, J-V curves and UV-Vis absorption spectrometry. When 0.1 wt% of MWCNT was employed in theTiO2-MWCNT composit on working electrode, the energy conversion efficiency increased about 12.5%compared to the TiO2 only working electrode. The higher light conversion efficiency may attribut to the highelectrical conductivity of MWCNT in TiO2-MWCNT composite which improves the electron transport in theworking electrode. However, higher amount of MWCNT than 0.1 wt% in the TiO2-MWCNT compositedecreases the light conversion efficiency, which is mainly ascribed to the decreased transmittance of light byMWCNT and to the decreased adsorption of dye onto TiO2. The MWCNT employed counter electrode exhibitedmuch lower light conversion efficiency of DSSC than the Pt-counter electrode, while the MWCNT-Pt counterelectrode showed similar in light conversion efficiency to that of Pt-counter electrode.
- keywords
- dye-sensitized solar cell, carbon nanotube, working electrode, counter electrode, <TEX>$TiO_2$</TEX>-MWCNT composite
Reference
1
1. M. Gratzel, Nature, 414, 338-344 (2001).
2
2. B. O'Regan, and M. Gratzel, Nature, 353, 737-740 (1991).
3
3. M. Gratzel, Inorg. Chem., 44(20), 6841-6851 (2005).
4
4. M. Gratzel, J. Photochem. Photobio. A, 164, 3-14 (2004).
5
5. A. Burke, S. Ito, H. Snaith, U. Bach, J. Kwiatkowski and M. Gratzel, Nano Lett. 8, 977-981 (2008).
6
6. D. P. Hagberg, J. H. Yum, H. Lee, F. De Angelis, T. Marinado, K. M. Karlsson, R. Humphry-Baker, L. Sun, A. Hagfeldt, M. Gratzel and M. K. Nazeeruddin, J. Am. Chem. Soc., 130, 4259-6266 (2008).
7
7. E. Stathatos and P. Lianos, Adv. Mater., 19, 3338-3341(2007).
8
8. Q. Wang, Z. Zhang, S. M. Zakeeruddin and M. Gratzel, J. Phys. Chem. C, 112, 7084-7092 (2008).
9
9. Y. Kondo, H. Yoshikawa, K. Awaga, M. Murayama, T. Mori, K. Sunada, S. Bandow and S. Iljima, Langmuir, 24, 547-550 (2008).
10
10. M. Gratzel, Prog. Photovolt.: Res. and Appl, 8, 171-185(2000).
11
11. M.-S. Kang and Y. S. Kang, J. Korean Ind. Eng. Chem., 16(2), 159-168 (2005).
12
12. E. Flahaut, A. Peigney, Ch. Laurent, Ch. Marlieure, F. Chastel and A. Rousset, Acta Mater., 48, 3803-3812(2000).
13
13. D. Tasis, N. Tagmatarchis, A. Bianco and M. Prato, Chem. Rev., 106, 1105-1136 (2006).
14
14. Y. Xing, L. Li, C. C. Chusuei and R. V. Hull, Langmuir, 21, 4185-4190 (2005).
15
15. A. G. Osorio, I. C. L. Silveira, V. L. Bueno and C. P. Bergmann, Appl. Surf. Sci., 255, 2485-2489 (2008).
16
16. B. I. Rosario-Castro, E. J. Contes, M. Lebron-Colon, M. A. Meador, G. Sanchez-Pomales and C. R. Cabrera, Mater. Charact., 60, 1442-1453 (2009).
17
17. Y.-R. Shin, S.-M. Jung, I.-Y. Jeon and J.-B. Baek, Carbon, 52, 493-498, (2013).
18
18. D. B. Mawhinney, V. Naumenko, A. Kuznetsova, J. T. Yates, J. Liu and R. E. Smalley, J. Am. Chem. Soc., 122(10), 2382-2383 (2000).
19
19. K.-M. Lee, C.-W. Hu, H.-W. Chen and K.-C. Ho, Solar Energy Mater. Solar Cell, 92, 1628-1633 (2008).
20
20. Y. Jo, J. Lim, H. Nam and Y. Jun, J. Korean Electrochem. Soc., 12, 301-310 (2009).
Other articles from this issue
- A short study of uncertainty for post column isotope dilution method in HPLC-ICP/MS
- Effect of concentration, pressure, and cut-off size on removing phospholipase A2 in bee venom by ultrafiltration
- VOCs impact factor analysis of unit components in Part assembly by ISO 12219-5 method
- Structural characterization and degradation efficiency of degradation products of iopromide by electron beam irradiation
- The application of a chemical assessment of archaeological animal bone by Fourier transform infrared spectroscopy and x-ray diffraction
- The characteristics of dye-sensitized solar cells using carbon nanotube in working and counter electrodes
- Microwave-modified sol-gel preparation of La2(MoO4)3:Er3+/Yb3 particles and their upconversion photoluminescence properties
- Distribution characteristics of hexabromocyclododecanes in crucian carp and sediment from the major rivers
- Validation of analysis of urinary fluoride by ion selective electrode method
- Validation of urinary N-methylacetamide reference material for proficiency test
- PCDDs and DFs concentrations from the fly ash and bottom ash of industrial waste incinerators in Korean
- Determination of boron in steel by HNO3-NH4HF2 digestion and ICP-MS
- Preparation and characterization of the primary gas standards for isoprene
- more
Recommanded Articles
This website recommended the use the Chrome browser for journal website.